Removing The Oven Door; Mounting The Oven Door; Cleaning The Glass Panels Of The Oven Door - Franke Frames FS 913 M Manuel D'utilisation

Removing the oven door

Open the oven
X X
door completely.
The hinges are equipped with two moveable locks.
To release the
X X
hinge lift the lock
and hold the door
at the sides near
the hinges.
Turn the two block
X X
hooks down.
Ensure that the block hooks are turned down
X X
completely.
Close the door
X X
halfway.
Pull the door
X X
outwards.
FS 913 M / FS 913 P

Mounting the oven door

After cleaning, the oven door has to be mounted again.
Slide the hinges into their grooves.
X X
Turn the two block hooks (used as hinge
X X
attachments) upwards.
CAUTION! Damage to the oven due to wrong
handling!
Never try closing the door when one or both
Z X
blocks are partially or completely open.
Close the oven door.
X X

Cleaning the glass panels of the oven door

The oven door and the glass panels can be removed
to enable thorough cleaning of the glass panel.
The oven door has 3 glass panels, 4 glass panels for
pyro model FS 913 P (intermediate glass panel):
– internal glass panel (near the cavity)
– intermediate glass panel (inside the oven door)
– external glass panel
The internal glass panel and the intermediate glass
panel can be removed for cleaning purposes.
The inside of the external glass panel can be cleaned
when the internal and the intermediate glass panel
are removed.
Removing and cleaning the internal glass panel
from the oven door
Ensure that the oven is cold before you start
Z X
cleaning.
Open the oven
X X
door completely.
Turn the two black blocks (with the word CLEAN,
X X
at the bottom of the door) for 180° so that they fit
into the seats in the oven structure.
– 31 –
EN