Mounting The Oven Door; Cleaning The Glass Panels Of The Oven Door - Franke MARIS FREE MA 82 M /F Série Manuel D'installation Et D'utilisation

Close the door
X X
halfway.
Pull the door
X X
outwards.

Mounting the oven door

After cleaning, the oven door has to be mounted again.
Slide the hinges into their grooves.
X X
Turn the two block hooks (used as hinge attachments)
X X
upwards.
CAUTION! Damage to the oven due to wrong handling!
Never try closing the door when one or both blocks
Z X
are partially or completely open.
Close the oven door.
X X

Cleaning the glass panels of the oven door

The oven door and the glass panels can be removed to
enable thorough cleaning of the glass panel.
The oven door has 3 glass panels:
– internal glass panel (near the cavity)
– intermediate glass panel (inside the oven door)
– external glass panel
The internal glass panel and the intermediate glass panel
can be removed for cleaning purposes.
The inside of the external glass panel can be cleaned when
the internal and the intermediate glass panel are removed.
Removing and cleaning the internal glass panel
from the oven door
Ensure that the oven is cold before you start cleaning.
Z X
MA 82 M _/F
Open the oven door
X X
completely.
Turn the two black blocks (with the word CLEAN, at
X X
the bottom of the door) for 180° so that they fit into
the seats in the oven structure.
– Make sure to turn the black blocks completely.
The blocks click into their position.
„ „
CAUTION! Damage to the oven due to wrong handling!
If the blocks are not turned completely, removing the
glass panel will cause the oven door to close immediately.
Never try closing the door when one or both blocks
Z X
have partially or completely freed the glass panel.
Carefully push the
X X
internal glass panel
(1) towards the oven.
Then lift the internal
glass panel (2).
The two black
„ „
blocks will
prevent the door
from closing.
Clean the internal glass panel.
X X
– 13 –
2
1
EN