Itc Control Panel - Rösle Memphis Elite 25330 Mode D'emploi

ITC control panel

The ITC basically functions like the temperature control on your kitchen cooker. In addition, the ITC also has
the ability to automatically adjust to different ambient conditions. That means that you can cook outside in
almost any weather. Adjusting the temperature control is simple and intuitive. It enables precise and fi nely
adjustable barbecueing.
2
1
8
Controls
Switches the appliance On/Off
1
Temp: for adjusting the temperature
2
(in 2°C increments)
Press both simultaneously to switch bet-
ween temperature display in °C and Fah-
renheit
LED display
3
LED: indicates operating status
4
Flashes when igniter is active or when
appliance is in cooling phase
Actual: actual cooking compartment
temperature
Grill: set temperature for cooking com-
partment
Meat: current temperature of core tem-
perature sensor
Set: lights up in setting mode
The ITC is a precise temperature control that continually checks the grill temperature and keeps it
constant.
A temperature sensor monitors the cooking compartment and transmits that information to the ITC.
Based on the measured readings, the ITC makes adjustments to the combustion system as required.
For optimum performance, you should barbecue with the hood down and make sure that the sensor
is clean and exposed.
Give the ITC enough time to adjust to changes to the set temperature.
40
3
5 Meat Probe: connection for meat ther-
mometer, 3.5mm jack plug
6 Probe Display: shows settings for core
temperature sensor and appliance
7 Temp Display: button for switching bet-
ween display of actual temperature and
set temperature
8 Pellet Prime: manual pellet feed: feeds
additional pellets into the fi rebox
4
5
6
7