Illuminated Control Knob (Two Colours) - Rösle Videro Pure G2 Mode D'emploi

Illuminated­control­knob­(two­colours)­
The lighting is not an indicator that the burner has been lit and a flame is burning.
Always check the lighting procedure and operation by means of a visual inspection.
The illuminated control knobs facilitate orientation at the control knob in poor lighting conditions.
Insert the 4 AA batteries – 1.5 V into the battery
compartment inside the lower cabinet on the right-hand
side:
3. Open the right door on the front.
4. Open the battery compartment lid by sliding it
along the battery compartment.
5. Insert the batteries and ensure the correct polarity
of each battery.
6. Close the battery compartment lid.
7. To switch on the lighting press the button on the
right-hand side of the operating panel.
8. The control knob illuminates white when the "switched-off burner" is in the "•" OFF position.
9. The control knob illuminates red when the "switched-on burner" is in the positions from MAX to MIN.
The lighting does not switch off automatically.
(optional equipment)
5
63