General cleaning
To preserve the original shine on metal surfaces and
paintwork, wash and clean your motorcycle at regular
intervals depending on the type of use and according to the
particular road conditions. Use specific products, where
possible biodegradable. Avoid aggressive detergents or
solvents.
E
Important
Do not wash your motorcycle immediately after use,
as marks can form due to evaporation of the water on hot
surfaces.
Never clean the motorcycle using hot or high-pressure
water jets. Cleaning the motorcycle with high-pressure
washers may lead to seizure or severe failure of the front
forks, wheel axles, electrical system, front fork seals, air
inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
If parts of the engine are unusually dirty or greasy, use a
degreasing agent, avoiding contact with transmission
components (chain, front and rear sprockets, etc.).
Rinse with warm water and dry all surfaces with chamois
leather.
62
Warning
There may be loss of braking efficiency immediately
after washing the motorcycle. Never grease or lubricate
the brake discs. This will cause loss of braking efficiency.
Clean the discs with an oil-free solvent.