General Cleaning - Ducati 749R Manuel D'utilisation Et Entretien

General cleaning

To preserve the original gloss on metal surfaces and
paintwork, wash and clean your motorcycle at regular
intervals, and depending on the type of use and according
to the particular road conditions. Use specific products,
where possible biodegradable. Avoid aggressive
detergents or solvents.
Important
Do not wash your motorcycle immediately after use,
as marks can form due to evaporation of the water on hot
surfaces. Never clean the motorcycle using hot or high-
pressure water jets. Cleaning the motorcycle with water
cleaners may lead to seizure or severe failure of front fork,
wheel hub assembly, electric system, front fork seals,
air inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
If needed, clean off stubborn dirt or grease from engine
parts using a degreasing agent. Be sure to avoid contact
with drive parts (chain, sprockets, etc.). Rinse with warm
water and dry all surfaces with chamois leather.
Warning
There may be loss of brake effectiveness immediately
after washing the motorcycle. Never grease or lubricate
the brake discs as this would cause loss of braking
effectiveness. Clean the discs with an oil-free solvent.
E
79