The System Setting Menu "System Setup - ModelCraft FS-T6 Notice D'emploi



13. The System Setting Menu "System Setup"

The basic settings of the remote control transmitter are made in the system setup menu first. These settings are not
referred to individual models. The specific settings of the individual models are only made afterwards in the function
setting menu (see chapter 14).
To get to the system setting menu, push and hold the scroll wheel for about
1 second with the transmitter on. The operating display in the display switches
to the menu display. The selection window around the remote control icon
shows that you can call the system setup menu in this setting.
Briefly confirm the scroll wheel button or the button "OK" to get to the system
setup menu.
The first 6 menu items of the system setting menu are now displayed.
The following setting functions are available for you in the system setting menu:
Function
Model memory selection
Model name settings
Model type selection
Copying model memory
Deleting model memory
Operation as a trainer transmitter
Operation as a student transmitter
Control stick assignment
Display brightness
Transmitter software version
Transmitter software update
Factory reset
78
Display
"Model select"
"Model name"
"Type select"
"Model copy"
"Model reset"
"Trainer mode"
"Student mode"
"Sticks mode"
"LCD brightness"
"Firmware ver."
"Firmware Update"
"Factory reset"
Figure 14