Switch Assignment "Switches Assign - ModelCraft FS-T6 Notice D'emploi

n) Switch Assignment "Switches assign"
In this menu, you can individually specify which switch you want to use for the different flight conditions or the throttle
switch (see last menu item).
Switch assignment setting
• Switch on the transmitter and call the function setting menu.
• Move the cursor arrow to the menu item "Switches assign" with the scroll
wheel.
• Briefly confirm the scroll wheel button or the button "OK" to activate the
menu item.
The display shows the three switching options with the respective assigned
switches. Depending on the current position of the switches, the displays
show "Normal" and "Off" or "Sport", "idle up" and "On".
• Turning the scroll wheel selects which one of the toggle switches "SwA",
"SwB", "SwC" or "SwD" should be used for switching the flight condition
"Normal" and "Sport".
• When pushing the scroll wheel button, the cursor arrow will jump to
switching the next flight condition "Normal" and "Idle up".
• Turning the scroll wheel selects the toggle switch to be used for this
switching.
• The switch for throttle switching is selected according to the same principle.
• Push the button "OK" afterwards to save the settings. The display then
shows the function setup menu again.
• Push the button "CANCEL" repeatedly until you get back to the operating
display.
Figure 46
111