Removing The Filling Tube - Salvis Master VisionPRO Mode D'emploi

en
Fill level mark
Pump switch with
indicator lamp
Lever for
drain tap
Safety
catch for
drain tap
Container
Pumping
. Switch on pump - Push pump switch.
D The indicator light in the switch comes on and the pump starts.
D Please observe: The intake time may last up to three minutes.
. Once the filling level of the frying oil/frying fat has been reached in the pan, switch off the
pump - push the pump switch.
D The indicator light in the switch goes off.
3.2.5

Removing the filling tube

38 / 96
Filling tube with handle
Filling tube with handle
Cap
Preparations
. For draining frying oil/frying fat into container
and filtering, see page 35 chapter 3.2.1.
. Push the filling tube into the cap.
D The filling tube must engage perceivably
and audibly.
CAUTION! Frothing over of the cooking
Cap
oil/fat! Observe filling level of the frying oil/frying
fat in the pan! Do not fill above the fill level
mark.
Manual switching on and off of the pump: The
filling process must be supervised and switched
off by hand.
. Close the drain tap.
. Hold the filling tube and push cap toward the
pan.
. Unplug the filling tube and allow to drain
empty in the pan and to drip dry.