Publicité
Cooling for several days
DHW
Mode:
Off
Time-contr.
Domestic hot water weekly planner
Desired temperature:
Circulation weekly planner
Manual
Desired temperature:
Rapid DHW
Heat up the domestic hot water cylinder once?
Ventilation boost
Activate ventilation boost?
Time programme assistant
Installation off
Should the entire installation be switched off?
C.2
Menu item: Current domestic hot water temperature
MENU | INFORMATION
DHW temperature:
8000017440_FT Operating instructions
Cooling mode is activated in the specified time period
Cooling mode and desired temperature are used from the cooling
function
Cooling from
Cooling until
Domestic hot water mode is switched off
Set the time periods.
Up to three time periods can be set per day.
ENTER START TIME
ENTER END TIME
Add time periods
Copy settings to...
Delete all time periods
Applies within the time periods
Domestic hot water mode is switched off outside of the time peri-
ods
Set the time periods.
Up to three time periods can be set per day.
ENTER START TIME
ENTER END TIME
Add time periods
Copy settings to...
Delete all time periods
The circulation pump pumps hot water to the draw-off points within
the time periods
Outside of the time periods, the circulation pump is switched off
Uninterrupted retention of the domestic hot water temperature
Heating up the water in the cylinder once
Yes, No
Heating mode is switched off for 30 minutes and, if available, the
ventilation unit runs at the highest ventilation level.
Yes, No
For heating mode, there are blocks for Mon–Fri and Sat–Sun.
The time programme assistant overwrites the weekly planner that
has been created for heating mode.
Installation is switched off. Frost protection and, if available, ventil-
ation remain activated at the lowest level.
Yes, No
Shows the current domestic hot water temperature.
199
Publicité
