Publicité
10.
To set up the product, carry out the steps described
above in reverse.
11.
Ensure that you reinstall the heat insulation correctly
on the pipe connections so that no condensate can
arise.
4.10
Removing the casing
4.10.1 Removing the front casing
1.
Remove the two screws and lift the upper section of
the front casing forwards and out.
8000017440_FT Installation and maintenance instructions
2.
Remove both screws, raise the lower section of the
front casing and pull it forwards and out.
4.10.2 Removing the side casing
T25
T25
1.
Remove the side casing as shown in the figures.
213
Publicité
