Publicité
4.12.2 Installing the front casing
1.
Hook the lower part of the front casing, using the re-
taining brackets, into the cut-outs in the side casings
and lower it down.
2.
Use the two screws to secure the lower part of the front
casing.
3.
Remove the locking pin from the electronics box.
4.
Secure the locking pin to the retainer on the electronics
box cover.
5.
Swivel the electronics box back.
8000017440_FT Installation and maintenance instructions
6.
Attach the upper front casing and secure this using the
two screws.
4.13
Setting up the indoor unit
1.
When setting up the product, take its weight, including
the water content, into account.
Technical data – General (→ Page 267)
0 - 10
2.
Orientate the product horizontally by adjusting the ad-
justable feet.
215
Publicité
