Publicité
2
Notes on the documentation
▶
Always observe all the operating and installation instruc-
tions included with the system components.
▶
Pass these instructions and all other applicable docu-
ments on to the end user.
2.1
Further information
▶
Scan the displayed code using your smartphone in order
to view further information about the installation.
◁
You are guided to installation videos.
3
Product description
3.1
Cooling mode
Depending on the country, the outdoor unit has the heating
mode or heating and cooling mode function. The indoor unit
is compatible with this.
Outdoor units that are delivered at the factory with no cooling
mode are labelled with "S2" in the nomenclature. For these
units, an optional accessory can be used to subsequently
activate the cooling mode.
It is activated via a coding resistor and via a setting on the in-
door unit's control panel and on the optional system control.
(→ Page 228)
206
3.2
Product overview
3.2.1
Product design
9
8
7
6
5
1
Hydraulic block
2
Optional output for the
condensate discharge
hose
3
Optional output for the
condensate discharge
hose
4
Carrying straps
Installation and maintenance instructions 8000017440_FT
1
2
3
4
5
Cylinder filling/draining
cock
6
Domestic hot water
cylinder
7
Control for the indoor
unit
8
Electronics box
9
Pipe outlet for the op-
tional circulation pump
accessories
Publicité
