Storage And Winter Break; Standard Spare Parts; Accessories - Viking MI 422 Manuel D'utilisation

Install the blue cable (BL) and the brown
cable (BR) in the plug as illustrated.
Tighten screws (1).

15.9 Storage and winter break

Note the following points when storing the
robotic mower for long periods (e.g. winter
break):
● Charge the battery ( 14.7)
● Switch off automatic mowing (
● Activate the highest safety level (anti-
theft alarm) ( 10.16)
● Activate the disabling device (
● Disconnect the power supply unit plug
from the mains
● Remove the docking station cover
( 9.5)
Disconnect the perimeter wire (1). Open
the cover of the cable duct (2) and guide
the perimeter wire together with the press-
fit connectors out of the docking station
socket.
134
Do not remove the press-fit
connectors from the perimeter wire
as they can only be installed once.
Additional press-fit connectors are
available from a VIKING specialist
dealer. (
Do not remove the perimeter wire
from the mowing area.
● Disconnect the power cable from the
docking station.
● Install the docking station cover.
10.5)
( 9.5)
● Remove the docking station.
● Protect the terminals (connectors) of
5.2)
the perimeter wire from environmental
influences (e.g. wrap with suitable
insulating tape).
● Carefully clean all external parts of the
robotic mower and the docking station.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry and locked place that is generally
free of dust. Dock the robotic mower in
the docking station. Make sure that the
machine is kept out of the reach of
children.
● Always store the robotic mower in good
operational condition.
● Keep all screws tightly fastened,
replace danger signs and warnings on
the machine that have become illegible,
check the entire machine for wear and
damage. Replace all worn or damaged
parts.
● Any machine faults must be completely
remedied prior to storage.
16.)
Never place or store objects on the
robotic mower or on the docking
station.
Resuming operation of the robotic
mower following prolonged
immobilisation:
The date and time may need to be
corrected following prolonged
immobilisation. Appropriate
selection windows are displayed
during initial operation. If the
selection windows are not
automatically displayed, check the
date and time in the "Settings"
menu and correct if necessary.
( 10.11)
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Install the docking station (
connect the perimeter wire. (
● Charge the battery ( 14.7)
● Check the mowing plan and change as
necessary ( 10.6)
● Switch on automatic mowing (

16. Standard spare parts

Mowing blade:
6301 702 0101

17. Accessories

Installation kits:
iKit S for lawns up to 500 m
6909 007 1011
iKit L for lawns from 2000 m
6909 007 1012
0478 131 9934 A - EN
9.5) and
9.7)
10.5)
2
2 2
– 4000 m