Automatic Mowing; Mowing Independently Of Active Times; Docking The Robotic Mower - Viking MI 422 Manuel D'utilisation

14.4 Automatic mowing

● Switching on automatic
mowing:
When automatic mowing is
switched on, the Automatic
symbol appears next to the battery
symbol in the display. (
● Starting mowing operation:
The mowing operations are
automatically distributed between the
available active times. (
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (
A running mowing operation can be
ended manually at any time using the
STOP button. ( 5.1)
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
14.5 Mowing independently of active
times
Mowing areas with docking station:
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● In order to mow a part of the mowing
area that can only be reached via a
corridor, carry the robotic mower there.
● Immediate mowing:
Call up the command Start
mowing( 10.5).
The mowing operation starts
immediately and continues until the
selected time.
128
● Time-delayed mowing:
Call up the command Start time-
delayed mowing. (
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing manually:
A running mowing operation can be
10.5)
ended at any time using the STOP
button. (
If necessary, the robotic mower
10.7) charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
14.6) Secondary areas:
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● Carry the robotic mower to the
secondary area.
● Activate the secondary area. (
● Immediate mowing:
Call up the command Start
mowing(
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the command Start time-
delayed mowing. (
The mowing operation starts at the
selected start time and continues until
the selected end time.
10.5)
5.1)
10.14)
10.5).
10.5)
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
( 23.)
A running mowing operation can be
ended manually at any time using the
STOP button. ( 5.1)
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.

14.6 Docking the robotic mower

Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
● Activate the command Drive to
docking station. ( 10.5)
● The red LED flashes on the docking
station after docking. (
After docking, no further mowing
operation takes place in the current
active time.
Manual docking:
● Push the robotic mower into the
docking station by hand.
0478 131 9934 A - EN
12.1)