Clothing And Equipment; Warning - Dangers Caused By Electrical Current - Viking MI 422 Manuel D'utilisation

regarding approved accessories and
attachments can be obtained from your
VIKING specialist dealer.
In particular, any tampering with the
machine which increases the power output
or speed of the motors is forbidden.
It is not permissible to make any
modifications to the machine that could
lead to increased noise emissions.
For safety reasons, the machine software
must never be modified or tampered with.
Particular care is required during use in
public green spaces, parks, sports fields,
along roads and in agricultural and forestry
businesses.
It is not permitted to transport objects,
animals or persons, particularly children,
on the machine.
Never allow persons, particularly children,
to ride or sit on the robotic mower.
Caution – risk of accident:
The robotic mower is intended for
automatic lawn care. Its use for other
purposes is not permitted and may be
dangerous or result in damage to the
machine.
Due to the physical danger to the user, the
machine must not be used for the following
applications (incomplete list):
– for trimming bushes, hedges and
shrubs,
– for cutting creepers,
– for the care of lawn roofs and balcony
boxes,
– for shredding or chipping tree or hedge
cuttings,
– for clearing paths (vacuuming,
blowing),
88
– for levelling earth mounds, e.g. mole
hills.

6.2 Clothing and equipment

Wear sturdy footwear with high-
grip soles and never work
barefoot or when wearing e.g.
sandals,
– when approaching the robotic mower
during operation.
Wear suitable work clothes
during installation, maintenance
operations and all other work on
the machine and docking
station.
Never wear loose clothes which may
become caught on moving parts – do not
wear jewellery, ties or scarves.
In particular, wear long trousers
– when approaching the robotic mower
during operation.
Always wear thick gloves during
maintenance and cleaning
operations, when laying and
removing wires and when
securing the docking station.
In particular, protect the hands when
working on the mowing blade and when
driving in the fixing pins or the docking
station pegs.
Long hair must always be tied up and
secured (headscarf, cap, etc.) when
working on the machine.
Suitable safety glasses must be
worn when driving in the fixing
pins and the docking station
pegs.
6.3 Warning – dangers caused by
electrical current
Warning:
Risk of electric shock!
Particularly important for
electrical safety are an
intact power cable and
mains plug on the power
supply unit. Damaged cables,
connectors and plugs, or electric
cables that do not conform to
regulations must not be used, to
prevent any risk of electric shocks.
Therefore, check the electric cable
regularly for signs of damage or
ageing (brittleness).
Only use an original power supply unit.
The power supply unit must not be used:
– if it is damaged or worn,
– if the cables are damaged or worn.
Check the power cable in particular for
damage and ageing.
Maintenance and repair work on power
cables and power supply units must only
be performed by specially qualified
technicians.
Danger of electric shock!
Do not connect a damaged cable to the
mains and only touch a damaged cable
once it has been disconnected from the
mains.
The electric cable on the power supply unit
must not be modified (e.g. shortened). The
cable between the power supply unit and
docking station must not be extended.
0478 131 9934 A - EN