Information Area - Viking MI 422 Manuel D'utilisation

The text "iMow ready for op." is
displayed in the bottom area of the
screen together with the symbol
shown and the automatic mowing status.
( 10.5)
Status information during running
activities:
The text "iMow mowing lawn" and a
corresponding symbol are shown on
the display during a running
mowing operation. The text and symbol
are adapted to the respective active
operation.
The text "Attention – iMow starting" and a
warning symbol are displayed before the
mowing operation.
Flashing of the display illumination
and a signal tone additionally
indicate the impending start of the
mowing motor. The mowing blade
is only activated a few seconds
after the robotic mower has been
set into motion.
Edge mowing:
While the robotic mower mows the
edges of the mowing area, the text
"Mowing edge" is displayed.
108
Drive to docking station:
When the robotic mower returns to
the docking station, the relevant
reason is indicated in the display (e.g.
Battery discharged, Mowing completed).
Battery charging:
The text "Charging battery" appears
during charging of the battery.
Message screen:
Errors, faults or recommendations are
displayed together with warning symbol,
date, time and message code. If several
messages are active, they appear
alternately. ( 23.)
The message and status
information appear alternatively if
the robotic mower is ready for
operation.

10.3 Information area

The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the Automatic symbol appears.
3. Time:
The current time is indicated in 24 hour
format.
0478 131 9934 A - EN