Preparatory Measures; Installation Material; Adjusting The Cutting Height; Setting The Language, Date And - Viking MI 422 Manuel D'utilisation

Preparatory measures:

● Mow the lawn using a conventional
lawn mower prior to initial installation
(ideal grass height of 3 to 4 cm).
● In the case of a hard and dry surface,
water the mowing area lightly in order to
make it easier to drive in the fixing pins.
When navigating through the
menus, follow the instructions in the
section entitled "Operating
instructions". ( 10.1)
You can select options, menu items
and buttons using the control pad.
You can open submenus and
confirm selections using the
OK button.
Use the Back button to
leave the active menu or
jump one step back in the
installation assistant.
If errors or faults occur during the
initial installation, a corresponding
message appears in the display.
( 23.)

9.2 Installation material

If the perimeter wire is not routed by the
VIKING specialist dealer, additional
installation material not included in the
standard equipment will be required to be
able to operate the robotic mower. (
94
Different installation kits are available with
the following contents (tailored to the size
of the mowing area): Perimeter wire on
reel (1) as well as fixing pins (2), press-fit
connectors (3) and wire connectors (4).

9.3 Adjusting the cutting height

Lowest cutting height:
Level 1 (20 mm)
Highest cutting height:
Level 8 (60 mm)
– Open flap. ( 14.2)
17.)
Turn the rotary knob (1). The marking (2)
indicates the set cutting height.
The rotary knob can be removed
upwards from the adjustment
element. This design serves a
safety function (it ensures that the
machine cannot be lifted and
carried by the rotary knob) and to
prevent the cutting height from
being modified by unauthorised
persons.
9.4 Setting the language, date and time
● Pressing any button on the display
activates the machine and thus the
installation assistant.
Select the required display language
and confirm with the OK button.
0478 131 9934 A - EN