Installing The Docking Station - Viking MI 422 Manuel D'utilisation

Confirm your language selection
with the OK button or select
"Change" and repeat the language
selection.
● If necessary, enter the 9-digit serial
number of the robotic mower. This
number is printed on the identification
plate (see Machine overview). (
Set the current date using the
control pad and confirm with the OK
button.
Set the current time using the
control pad and confirm with the OK
button.
0478 131 9934 A - EN

9.5 Installing the docking station

Study the installation examples in
this instruction manual. (
A canopy top available as an
accessory can be mounted on the
docking station. This provides
3.1)
better protection for the robotic
mower against the weather.
Install the docking station in a protected,
shady location. Direct sunlight can lead to
increased temperatures in the machine
and longer battery charging times.
The docking station should be easily
visible in its chosen location to prevent the
risk of tripping over it.
A mains connection is necessary for
operation of the docking station. This must
be close enough to the docking station that
the respective power cables can be
connected to both the docking station and
the mains connection – do not change the
power cable of the power supply unit.
There are two options for installing
the docking station (internal and
external). In the case of the internal
docking station, the station is
26.)
located within the mowing area.
The docking station is not located
directly in the mowing area with the
external option.
Internal docking station:
The docking station (1) is located within
the mowing area (A) (grey area).
95