Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 72

Masquer les pouces Voir aussi pour TT-R125:

CLEANING AND STORAGE

If your machine is to be stored for 60 days or

more, some preventive measures must be

taken to avoid deterioration. After cleaning the

machine thoroughly, prepare it for storage as

1. Drain the fuel tank, fuel lines, and the car-

buretor float bowl.

2. Remove the spark plug, pour a table-

spoon of SAE 10W-30 motor oil in the

spark plug hole, and reinstall the plug.

With the engine stop switch pushed in,

kick the engine over several times to coat

the cylinder walls with oil.

3. Remove the drive chain, clean it thor-

oughly with solvent, and lubricate it. Rein-

stall the chain or store it in a plastic bag

tied to the frame.

4. Lubricate all control cables.

5. Block the frame up to raise the wheels off

6. Tie a plastic bag over the exhaust pipe

outlet to prevent moisture from entering.

7. If the machine is to be stored in a humid

or salt-air environment, coat all exposed

metal surfaces with a film of light oil. Do

not apply oil to rubber parts or the seat

Make any necessary repairs before the

machine is stored.