Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 500

FRONT FORK
4. Install:
Copper washer
G
Bolt (damper rod)
G
LT
NOTE:
Use the damper rod holder 1 and the T-han-
dle 2 to lock the damper rod.
Damper rod holder:
YM-1300/90890-01294
T-handle:
YM-01326/90890-01326
5. Install:
Oil seal 1
G
NOTE:
Apply the fork oil on the inner tube.
G
When installing the oil seal, use vinyl seat a
G
with fork oil applied to protect the oil seal lip.
Install the oil seal with its manufacturer's
G
marks or number facing upside.
Press the oil seal into the outer tube with fork
G
seal driver attachment (ø30) 2 and fork seal
driver weight 3.
Fork seal driver weight:
YM-33963/90890-01367
Fork seal driver attachment:
YM-33281/90890-01400
6. Install:
Stopper ring 1
G
NOTE:
Fit the stopper ring correctly in the groove in
the outer tube.
5 - 38
CHAS
New
23 Nm (2.3 m · kg, 17 ft · lb)
New