Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 204

FRONT BRAKE ADJUSTMENT
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
Check the operation of the brake after
bleeding the brake system.
3. Install:
FRONT BRAKE ADJUSTMENT
TT-R125/TT-R125E
1. Check:
2. Adjust:
Brake lever free play adjustment steps:
Loosen the locknuts 1.
G
Turn the locknuts until free play a is
G
within the specified limits by changing their
tightening position.
Tighten the locknuts.
G
NOTE:
For minute adjustment, loosen the locknut 2
on the lever side and adjust with the adjuster
3.
CAUTION:
Make sure that there is no brake drag after
adjusting the brake lever free play.
3 - 16
reservoir.
WARNING
Diaphragm
G
Brake master cylinder cap
G
Brake lever free play a
G
Out of specification → Adjust.
Brake lever free play a:
10 ~ 15 mm (0.39 ~ 0.59 in)
Brake lever free play
G
INSP
ADJ