Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 258

FUSE INSPECTION (TT-R125E/TT-R125LWE)
3. Replace:
Blown fuse
G
Replacement steps:
Set the main switch to "OFF".
G
Install a new fuse of the correct amperage.
G
Set on the switches to verify if the electri-
G
cal circuit is operational.
If the fuse immediately blows again, check
G
the electrical circuit.
Items
Main fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
Battery cover
G
3 - 42
INSP
ADJ
Amperage
Q'ty
rating
10 A 1