Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 526

Å ı
3
3
1
HANDLEBAR
7. Install:
Engine stop switch 1
G
2
Clutch lever holder 2
G
Bolts (TT-R125/TT-R125LW) 3
G
Screws (TT-R125E/TT-R125LWE) 3
G
NOTE:
The engine stop switch and clutch lever
G
holder should be installed according to the
dimensions shown.
Pass the engine stop switch lead in the mid-
G
dle of the clutch lever holder.
Å TT-R125/TT-R125LW
ı TT-R125E/TT-R125LWE
8. Install:
Clutch cable 1
G
Clamp
G
NOTE:
Apply the lithium soap base grease on the
clutch cable end.
9. Adjust:
Brake lever free play
G
Refer to "FRONT BRAKE ADJUST-
MENT" section in the CHAPTER 3.
Clutch lever free play
G
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
5 - 51
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)