Yamaha TT-R125 Manuel D'atelier Du Proprietaire page 41

Masquer les pouces Voir aussi pour TT-R125:

YM-1312-A, 90890-01312

YU-33270-B, 90890-01362

YM-33963, 90890-01367

YM-33281, 90890-01400

YU-33975, 90890-01403

YS-1880-A, 90890-01701

YU-3112-C, 90890-03112

YM-4019, 90890-04019

YM-91042, 90890-04086

Tool name/How to use

Fuel level gauge

This gauge is used to measure the fuel level in the

float chamber.

Flywheel puller

This tool is used to remove the rotor.

Fork seal driver weight

Fork seal driver attachment

These tools are used to installing the fork oil seal.

Steering nut wrench

This tool is used when tighten the steering ring nut to

specification.

Sheave holder

This tool is used for when loosening or tightening the

flywheel magneto securing nut.

Pocket tester

Use this tool to inspect the coil resistance, output

voltage and amperage.

Inductive tachometer

Engine tachometer

This tool is needed for observing engine rpm.

Valve spring compressor

This tool is needed to remove and install the valve

Clutch holding tool

This tool is used to hold the clutch when removing or

installing the clutch boss securing nut.

SPECIAL TOOLS

Illustration