Corghi Pro 750 Manuel D'utilisation page 85

- Adjustable speed from 150 to 220 rpm.
- Automatic sensor for measuring distance and diameter (version with analogue sensor).
- Automatic sensor for width measurement (if present).
- Automatic brake for stopping the wheel at the end of the spin.
- Wheel-holder shaft locking brake (optional)
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- Automatic start when safety guard is lowered (version with guard).
- Luminous digital display unit double display and 3D graphics.
- Microprocessor processing unit (32 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making the machine easy to use.
- Unbalance value display in grams or ounces.
- Unbalance display rounding-off setting.
- Balancing modes available:
• Standard: dynamic balancing (both sides of rim).
• Alu / Alu p: seven different programmes for alloy rims.
• Motorcycle dynamic: dynamic balancing on both sides of conventional motor cycle wheels.
• Motorcycle ALU: dynamic balancing on both sides of alloy motor cycle rims.
• Static: on one plane only.
- "Shift planes" programme (in Alu P) for using multiple five gram weights, i.e.: available
without the need for partial cuts.
- "Hidden Weight" programme (in Alu P) in order to divide the outer side balancing ad-
hesive weights into two equal weights positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle programmes) to divide the weight into two
equivalent values to be placed on either side of the spoke.
- "OPT flash" programme for rapid optimisation of operating noise reduction.
- General utility programmes:
• calibration
• service
• diagnostics.
- Power voltage ............................... single phase 100/115 V ±10%, 200/230 V ±10%, 50/60 Hz
- Rated power......................................................................................................................200 W
- Rated current ................................................................... 1.8 A at 100/115V, 0.9 A at 200/230V
- Maximum unbalance value calculated....................................................................999 grams
- Average spin time (with 5"x14" wheel)............................................................................7 sec
- Shaft diameter ................................................................................................................40 mm
- Ambient work temperature .....................................................................................5° to 40°C
- Machine dimensions......................................................................................... Fig. 9/9a/9b/9c
Service Pro 750 Operator's manual
MAIN FEATURES
TECHNICAL DATA
UK
85