Corghi Pro 750 Manuel D'utilisation page 114

• press the
15. GENERAL CONFIGURATIONS - SET UP
The machine can be configured according to your requirements. The following configura-
tions are available:
- Selecting vehicle type (car – motorcycle)
- Selecting the mode for acquiring wheel dimensions in the ALU1 and ALU2 balancing
programmes (ONLY the version with manual sensor)
- Unbalance unit of measurement
- Unbalance rounding-off
- Warning OPT
- Rim diameter display unit of measurement
- Rim width display unit of measurement
- Acoustic signal
- Setting - Adhesive weight application position (CLIP - LASER h6-h12)
- Display brightness setting
- LED light (if provided)
- Laser indicator (if provided)
Proceed as follows to access the configuration menu:
• press the
• use the
• press the
15.1. SET UP - SELECTING VEHICLE TYPE
Configuration used for enabling motorcycle wheel balancing functions.
Proceed as follows to recall this programme:
- press the
- use the
114
key to exit.
key
keys to search for SEt UP
key.
(CAR-MOTORCYCLE)
key
keys to search for SEt UP
Operator's manual Service Pro 750