Corghi Pro 750 Manuel D'utilisation page 81

Before applying a label, ensure that the surface is clean, dry and free of dust.
Refer to the instructions in the customisation kit
to apply the machine name adhesive plate to the
casing (fig. 6) or optional personalisation panel
(upon request) refer to the instructions inside the
customization kit..
Fixing the machine to the ground
If you want to ground the machine, refer to the
following instructions:
- undo the three screws fastening the machine to
the pallet;
- Position the machine on the ground in the selected
position and make sure that the
surrounding spaces correspond to the minimum
values indicated in Fig. 5a/5b;
- Trace the position for drilling on the floor;
- drill holes in the positions marked and insert
Fischer M8 anchor bolts in the holes;
- Fix the machine to the ground using the Fischer
screws and washers (fig.7).
- Tighten the three fastening screws to the body.
Service Pro 750 Operator's manual
Adhesive plates sticking
(fig.7)
6
UK
7
81