Corghi Pro 750 Manuel D'utilisation page 101

previously measured distance d2.
- Press the key again to set the machine for entering the nominal wheel diameter.
- Read the rated rim diameter value on the tyre.
- Modify the value displayed on the right display by pressing the
to get the previously measured nominal diameter.
- Press to display the unbalance values (recalculated according to the new dimensions)
or perform a wheel spin.
Fig. 14: Manual acquisition of the wheel distance in the ALU 2P Program Type
Fig. 15: Manual acquisition of the distance of the internal plane in the Program Type ALU 1P
Service Pro 750 Operator's manual
14
15
keys
UK
101