Corghi Pro 750 Manuel D'utilisation page 120

-b- MM to activate the display in millimetres
or -b- in to activate the display in inches
- press the
15.8. SET UP – ACOUSTIC SIGNAL
The machine can be configured to beep each time a key is pressed on the keypad.
Proceed as follows to modify this configuration:
- press the
- use the
- press the
- use the
- press the
1 - low beep
2 - medium beep (factory setting)
3 - High beep
OFF - acoustic signal disabled
- press the
15.9. SET UP - ADHESIVE WEIGHT
The machine makes it possible for the operator to select where the adhesive weight should
be applied based on his needs. To select this configuration, proceed as described below:
- press the
- use the
120
key to confirm and exit.
key
keys to search for SEt UP
key to confirm
keys to search for biP on (biP oFF if the beeper is disabled)
key to change the setting:
key to confirm and exit.
APPLICATION POSITION
key
keys to search for SEt UP
Operator's manual Service Pro 750