OmniPod DASH Guide De L'utilisateur page 69

4 Blood Glucose Readings
Note: Alternatively, you can enter a blood glucose reading using the circular
slider (see "Using a slider" on page 6). When using the slider, '+' and '-'
buttons appear briefly. Tap these buttons to make small adjustments to the
blood glucose number.
Note: When you enter a blood glucose reading above 33.3 mmol/L, the
PDM stores it as "HI". When you enter a blood glucose reading below 1.1
mmol/L, the PDM stores it as "LO".
For the meaning of the screen's colours and messages, see "How Blood
Glucose Readings are Displayed" on page 54.
4. Optional: To add one or more informational tags to the blood glucose
reading shown in the circle, see "Tagging Your Blood Glucose Reading" on
page 53.
5. After the blood glucose reading and any tags are entered, do one of the
following:
• Tap ADD TO CALCULATOR to save any tags and enter the blood glucose
reading into the Bolus Calculator. Then go to "Bolusing with the Bolus
Calculator" on page 57. If the Bolus Calculator is off or disabled or if
insulin is suspended, ADD TO CALCULATOR does not appear.
• Tap SAVE to save the blood glucose reading and any tags in the history
records. If you accessed this screen from the Bolus Calculator, SAVE does
not appear.
• Tap CANCEL, then YES, to exit the screen without saving the blood
glucose reading or tags.
The PDM records the current time as the time of the blood glucose reading.
52
Effective Date: 18OCT2020, PCO-000235