OmniPod DASH Guide De L'utilisateur page 128

Alarms, Notifications, Communication Errors 10
If you are using your PDM when a notification is triggered, the notification
message appears at the top of the screen. To remove the message from the screen:
• Do nothing. The message disappears after several seconds and is saved as a
new message.
• Swipe up to remove the message immediately and save it as a new message.
• Swipe right to remove the message immediately and save it as an
acknowledged message.
Acknowledging notifications
Note: Waking up and using your PDM does not automatically acknowledge, or
silence, notifications.
All new notifications are included in the Notifications & Alarms count (
the red circle in the upper right of most screens.
To acknowledge the notification:
1. Wake up your PDM.
2. Tap the bell icon (
3. Read any messages with blue notification icons (
if necessary, to see any additional notifications with blue icons (
4. Tap the back arrow (
notifications as acknowledged.
Note: Putting the PDM to sleep by pressing the Power button does not mark
the notifications as acknowledged. You must tap the back arrow (
acknowledge the notification.
) to bring up the Notifications & Alarms screen.
) in the upper left of the screen to mark the
) in
). Scroll down the screen,
).
) to
111
Effective Date: 18OCT2020, PCO-000235