Correction Factor; Reverse Correction - OmniPod DASH Guide De L'utilisateur

2 Initial PDM setup

Correction Factor

Your Correction Factor defines how much
one unit of insulin lowers your blood
glucose level. The Bolus Calculator uses
the Correction Factor to calculate the
correction portion of a suggested bolus.
You can create up to eight Correction
Factor segments per day.
1. Review the description of Correction
Factor, then tap NEXT.
2. Enter the end time.
3. Enter the Correction Factor in the 1
Unit of Insulin Decreases BG by field.
4. Tap NEXT.
5. Add additional segments as necessary
until the final end time is midnight.
6. Review your Correction Factor
segments. Tap any entry to correct it.
7. When the segments and values are correct, tap SAVE.

Reverse Correction

There may be times when you are about to eat and your blood glucose level is
below your Target BG level. If Reverse Correction is on, the Bolus Calculator
decreases a suggested meal bolus to help counteract your low blood glucose.
1. Toggle the Reverse Correction button on or off:
• Select the On position if you want the Bolus Calculator to reduce the
suggested meal bolus when your blood glucose is below your Target BG.
• Select the Off position if you do not want the Bolus Calculator to adjust
the suggested meal bolus based on a low blood glucose value.
2. Tap NEXT.
34
Effective Date: 18OCT2020, PCO-000235