OmniPod DASH Guide De L'utilisateur page 23

1 Omnipod DASH™ Insulin Management System
Using a number pad
Using a scroll wheel
Place your finger on the scroll wheel. Move your finger up to select
a smaller number and down to select a larger number. The faster
you move your finger, the faster the wheel will scroll.
When your desired selection is shown in the centre of the wheel,
select the value by tapping it or by tapping outside the scroll wheel.
Using a slider
Use sliders to select a value from a scale. Place your finger on the small open circle
and move your finger until your desired value is displayed. Depending on the
on-screen graphic, you may move your finger vertically or in a circle to move
the slider. Move your finger up or clockwise for a larger number and down or
anti-clockwise for a smaller number. Lift your finger when the desired value is
displayed.
Move the
slider up or
down
Selecting, Adding and Deleting Items
Toggles
Tap a toggle to change the selection from one side to the other.
Toggles allow you to choose between two options or to turn a feature on or
off. The toggle is on the right side and blue when a feature is on, and on the
left and grey when a feature is off.
6
Tap a number to add it to the entry field. Tap the full stop
(.) to add a decimal point. Tap the backspace icon (
to delete the most recent entry from the entry field. The
comma (,), dash (-) and underscore (_) are not used.
Tap the green tick symbol (
number. You can also tap outside the number pad to
accept the entered number.
Move the slider around the circle
)
) to accept the entered
Effective Date: 18OCT2020, PCO-000235