OmniPod DASH Guide De L'utilisateur page 125

9 Adjusting Settings
Correction Factor
The Bolus Calculator uses your Correction Factor to calculate a correction bolus
when your blood glucose value is above your Correct Above setting (see "The
Bolus Calculator" on page 144). To edit this value:
1. Write a list of all of the desired Correction Factor segments to guide you
through re-entering the values for each segment.
Tip: You can write this list on the pages at the end of this User Guide.
2. Navigate to: Settings icon (
3. Tap NEXT.
4. To edit a segment, tap the row containing the segment you want to edit.
a. Tap the End Time field to enter a new end time.
b. Tap the 1 Unit of Insulin decreases BG by field and enter a new
Correction Factor.
c. Tap NEXT.
5. Repeat the previous step as needed for the remaining segments.
6. After confirming that all segments are correct, tap SAVE.
Note: You can add and delete segments by editing the existing segments.
Reverse Correction
The Reverse Correction setting determines how the Bolus Calculator handles
meal boluses when your blood glucose value is below your Target BG (see
"Reverse Correction" on page 146 for more details).
To turn Reverse Correction on or off:
1. Navigate to: Settings icon (
2. Tap the toggle on the Reverse Correction line to turn it on or off.
Duration of Insulin Action
The Bolus Calculator uses your Duration of Insulin Action setting to calculate the
amount of insulin on board (IOB) from a previous bolus. To edit this value:
1. Navigate to: Settings icon (
2. Tap the Duration of Insulin Action field and enter the new value.
3. Tap SAVE.
108
) > Bolus > Correction Factor.
) > Bolus.
) > Bolus > Duration of Insulin Action.
Effective Date: 18OCT2020, PCO-000235