Electrical Interference; Cleaning Your Pdm - OmniPod DASH Guide De L'utilisateur

11 Taking Care of Your PDM and Pod
4. Leave the battery compartment door open until the PDM is thoroughly dry.
5. After the PDM has thoroughly air-dried, replace the battery and replace the
door to the battery compartment.
6. Turn on the PDM to see if it is working.
7. If the PDM is not working, call Customer Care.
Caution: The PDM is not waterproof. Do NOT place it in or near water.

Electrical interference

The PDM is designed to withstand normal radio interference and
electromagnetic fields, including airport security and mobile phones. However,
as with all wireless communication technology, certain operating conditions can
interrupt communication. For example, electrical appliances such as microwave
ovens and electric machinery located in manufacturing environments may cause
interference. In most cases, interruptions are easy to resolve by moving to a new
location (for more information, see "Communication Errors" on page 120).
USB cable
When you use a USB cable to upload your PDM records to another device or to
charge your PDM, disconnect the USB cable as soon as you are finished.
Caution: Only connect a USB cable to your PDM when charging the battery or
transferring data to a computer or another device. Never connect a USB cable to
the PDM for any other reason.
Note: You can use the PDM while it is charging or transferring data.
Caution: When you connect a USB cable to the PDM, only use a cable that is less
than or equal to 1.2 metres (4 feet) in length.

Cleaning your PDM

Always keep your PDM USB port free of debris and liquids. Dirt, dust and liquids
can impair the functionality of your PDM or damage it.
Caution: Do not use solvents to clean your PDM. Do not immerse your PDM in
water.
To clean your PDM:
1. Press the Power button briefly to put your PDM to sleep.
2. Wipe the outer surface of the PDM with a damp, lint-free cloth. If necessary,
use a solution of a mild detergent mixed in warm water.
3. Dry the outer surface with a dry, lint-free cloth.
Caution: While cleaning, do NOT allow debris or liquid to get into the USB port,
speaker, earphone jack socket, Sound/vibrate button, or Power button.
128
Effective Date: 18OCT2020, PCO-000235