Modifying Basal Insulin Delivery; Using Temporary Basal Rates; Activate A Temp Basal - OmniPod DASH Guide De L'utilisateur

CHAPTER 6

Modifying Basal Insulin Delivery

This chapter describes how to modify your basal insulin delivery by using
temporary basal rates or by switching to a different Basal Program (see
"Temporary Basal Rates" on page 139).
To create a new Basal Program, see page 75. To edit an existing Basal Program, see
page 77.

Using Temporary Basal Rates

Use a temporary basal rate, or 'temp basal', to handle a temporary change in your
routine. For example, a temp basal can be used when you are exercising or when
you are ill. When a temp basal ends, the PDM automatically reverts to delivering
the scheduled Basal Program.
You cannot activate or cancel a temp basal during an immediate bolus, but you
can activate or cancel a temp basal while an extended bolus is running.
To create a temp basal preset for a frequently used temp basal, see "Create a new
temp basal preset" on page 79.
To activate a temp basal preset, see "Activate a temp basal preset" on page 71.
Tip: By default, the PDM or Pod sounds a tone at the beginning and end of a temp
basal and every 60 minutes while a temp basal is running. To turn these on or off, see
"Informational Signals List" on page 119.

Activate a temp basal

You can only activate a temp basal if the temp basal setting is on. To turn on the
temp basal setting, see "Temp basal" on page 105.
To define and activate a temp basal:
1. Navigate to: Menu icon (
The screen shows a graph of the active Basal Program.
Note: To activate a temp basal preset, tap SELECT FROM PRESETS and go to
step 2 of "Activate a temp basal preset" on page 71.
) > Set Temp Basal.
69
Effective Date: 18OCT2020, PCO-000235