Spektrum BEAST X AR7210BX Mode D'emploi page 40

EN
F Tail—RevoMIX
The Spektrum AR7210BX can pre-compensate for torque variations on the tail before any
noticeable change. RevoMIX relieves the tail control loop and improves tail performance on
helicopters with insufficient tail authority and/or high powered electric helicopters.
To see the compensation direction:
1. Move the collective pitch, roll and elevator stick at any time. The tail rotor has to
deflect to counter the rotor torque. The tail rotor blades deflect the least when the
main rotor is at 0° pitch (the point where the main rotor produces the least torque).
2. Pitch positive or negative direction, move the aileron or elevator control. A deflection
is added to the tail rotor to counter the torque. The height of the deflection depends
on the collective pitch angles in Setup Menu Point K.
3. A helicopter with a clockwise rotation main rotor will steer the nose of the helicopter
to the right. When control input is given, the tail slider/tail rotor will move slightly in
a given direction.
4. Cycle through the options and find the direction that matches your model. You then
have four options: Off, Low, High or By Computer.
Status-LED
OFF
Purple Solid
Red Flashing
Red Solid
Blue Flashing
Blue Solid
The option "User Defined" allows you to define your own settings using the optional PC Software.
Press the setup button once to move to Menu Point G.
Torque Precompensation
User Defined
Off*
Low—Normal Direction
High—Normal Direction
Low—Reverse Direction
High—Reverse Direction
40
*
Factory setting