Spektrum BEAST X AR7210BX Mode D'emploi page 4

EN
Box Contents
Spektrum AR7210BX
Bind Plug
Mounting tape
Adjustment tool
Instruction Manual
Program Guide
Preflight Safety Precautions and Checklist
• Read all safety precautions and literature prior to use of this product.
• Always ensure the receiver and transmitter are properly bound before flight.
• Always ensure batteries are fully charged and have proper capacity for the flight time you intend.
• Always exit programming mode before flying.
• Always use the included mounting tape and ensure it is properly mounted and in good
condition before each flight.
• Power your transmitter on first and then the receiver.
• Always allow the Spektrum AR7210BX to initialize before flight.
• Confirm the cyclic and tail rotor servos do not bind at the full range of the throw.
• Perform a control test, ensuring controls move in correct directions.
Swashplate—
Cyclic Gain
Setup Button
Menu Point
LED
Status LED
Features
• Integrated BEASTX flybarless technology and Spektrum receiver
• Optional DSMX remote receiver capable
• SmartSafe™ failsafe system
• Flight Log and Telemetry compatible (optional)
• 2048 Resolution
• High-speed 11ms operation when used with capable transmitters
Applications
• All size electric, nitro/gas and turbine flybarless 3D helicopters
• Scale flybarless helicopters (multiblade compatible)
CAUTION: Do not use with flybar helicopters or airplanes.
WARNING: For first-time use or when making mechanical changes that involve
throw, always ensure you reset the servo limits to prevent binding. Not doing so will
cause the helicopter to crash, resulting in property damage and injury.
Optional Parts
DSMX Remote Receiver (SPM9645)
USB interface (SPMA3030)
Gas/Nitro RPM Sensor (SPM9560)
Swashplate—
Direct Cyclic Feed Forward
Tail Dynamic
4