Spektrum BEAST X AR7210BX Mode D'emploi page 10

EN
Accessing Menu Levels
From flight-ready mode (A through N LEDs off) you can access two different Menu Levels
— Setup Menu and Parameter Menu. You can only access one Menu Level at a time.
Setup Menu—Access all basic settings for helicopter setup.
To access the Setup Menu: Press and hold the setup button until LED A stops flashing and
lights up solid.
Parameter Menu—Access settings to adjust the helicopter's flight characteristics. The
Parameter Menu is used between flights.
To access the Parameter Menu: Press the setup button until LED A flashes rapidly. Release
the setup button when LED A flashes.
Selection Within Menu Points
Each menu level consists of several menu points. At most of the menu points the Status LED
indicates menu point options. The options are:
Status-LED
OFF
Purple Flashing
Purple Solid
Red Flashing
Red Solid
Blue Flashing
Blue Solid
Red/Blue
Move the rudder stick left to move counterclockwise through the options. Move the rudder stick
right to move clockwise through the options. The available options depend on the menu point.
Switching to the Next Menu Point
The currently active menu point is indicated by the yellow menu LED row. Each menu point allows
you to adjust a specific setting. When entering one of the Menu Levels you will start with menu
point A of the Menu Level. When you have adjusted the menu point quickly press the setup
button to move to the next menu point. Quickly press the setup button if you want to skip menu
points. Do not move the transmitter sticks when you are at a menu point you want to skip.
LED solid: LED flashing:
Rudder Stick
10