Spektrum BEAST X AR7210BX Mode D'emploi page 38

EN
D Rudder Rate Consistency
The setting of Menu Point D determines how constant the tail gyro will maintain the rotation
rate from the rudder stick when operated in HeadingLock Mode:
1. Start with Rate Consistency set to low or very low and maximize the tail gain in your
transmitter.
2. Increase the Rate Consistency in the Spektrum AR7210BX until the desired result is
achieved.
Rate Consistency Too Low
Rate Consistency Too High
When the appropriate setting is determined, it is usually necessary to re-adjust the tail gyro
gain in the transmitter.
Status-LED
OFF
Purple Solid
Red Flashing
Red Solid
Blue Flashing
Blue Solid
IMPORTANT: If the tail pirouettes and stops unevenly in both directions, set the tail gyro
to Rate-Mode. Test whether the tail will drift in a particular direction during hover. If it does,
adjust the tail link rod length so the tail rotor blades have the required compensation for
pitch or trim the rudder servo as described for Parameter Menu Point A. If you adjust the
tail link rod length, you must reset the tail rotor limits (Setup Menu Point E).
The option "User Defined" allows you to define your own settings using the optional PC Software.
Press the setup button once to move to Parameter Menu Point E.
Pirouettes are inconsistent in fast forward flight or in
crosswind conditions.
Fast tail-direction changes are more difficult to control.
The tail may also move gently while hovering or flying
around and will bounce back when stopping the rotation.
Rudder Rate Consistency
User Defined
Very Low
Low
Medium*
High
Very High
*
Factory Setting
38