Spektrum BEAST X AR7210BX Mode D'emploi page 34

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Dial 3: Tail Dynamic
Turn Dial 3 clockwise to increase the tail dynamic or counterclockwise to decrease the tail dynamic.
Factory setting for Dial 3 is horizontal
Make sure the maximum possible tail gyro gain has already been determined before adjusting
the tail dynamic.
The tail should stop perfectly, to the point without making any flapping noises. Increasing the Tail
Dynamic will lead to harder stopping behavior and more aggressive response to tail stick inputs.
Tail Dynamic Too High
Tail Dynamic Too Low
Transmitter Adjustment: Tail Gyro Gain
Tail gain can be adjusted using the transmitter's gear channel. Most transmitters have a gyro
screen that allows gyro adjustments. It is important that the gyro function is assigned to the
gear channel in the transmitter.
Status-LED
Purple Solid
Blue Solid
The color of the Status LED indicates the selected mode when the Spektrum AR7210BX is
ready for operation.
When the gain channel is centered, LED A = 0% gain. The maximum adjustable tail gain
is 100% in both modes (LED N = 100%). One of the LEDs A through N will light for 8
seconds to show the amount of tail gain. A = 0% to N=100%.
For the first flights, do not use a gain higher than F or G in Heading Lock Mode.
To find the optimal gain:
1.
Start with a low gain value where the tail will feel very weak.
2.
Increase the gain step by step until the tail feels more precise and holds better on
sudden pitch inputs.
3.
If the gain is too high, "wagging" will appear in fast forward or backward flight.
Rate-Mode
Status-LED: Purple
-100%
IMPORTANT: The tail gyro can't be operated in Rate-Mode when SAFE
with Combined Switch Channel, see below. Here switching the GEAR channel to negative
side will activate SAFE
The tail will bounce back shortly after a hard stop and
will respond delayed to stick inputs when making fast
direction changes.
Stopping and response to stick inputs might be too soft.
Rate Mode
Heading Lock Mode
Menu LED:
Tail gyro gain (GEAR)
technology.
®
A
HeadingLock-Mode
Status LED: Blue
0%
34
100%
technology is used
®

Publicité

Table des Matières
loading

Table des Matières