Description Of The Machine; Safety Measures; Side Brush; Important - TSM DURASWEEP 115 Mode D'emploi

5 5 5

DESCRIPTION OF THE MACHINE

DESCRIPTION OF THE MACHINE DESCRIPTION OF THE MACHINE
5.1 5.1 5.1

Safety measures:

Safety measures: Safety measures:
Fig. 3 shows the safety protections, which must be carefully fitted and in good working condition. Fig. 3 shows the safety protections, which must be carefully fitted and in good working condition. Fig. 3 shows the safety protections, which must be carefully fitted and in good working condition.
The machine cannot be used with one or more safety protections devices missing or damaged. The description of the The machine cannot be used with one or more safety protections devices missing or damaged. The description of the The machine cannot be used with one or more safety protections devices missing or damaged. The description of the
protection devices and relevant order codes are shown below: protection devices and relevant order codes are shown below: protection devices and relevant order codes are shown below:
PART. PART. PART.
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
5.2 5.2 5.2

Side brush:

Side brush: Side brush:
The side brush, Part. 1 Fig. 4, acts as a dust and waste The side brush, Part. 1 Fig. 4, acts as a dust and waste The side brush, Part. 1 Fig. 4, acts as a dust and waste
conveyor. Its purpose is to clean edges, corners and conveyor. Its purpose is to clean edges, corners and conveyor. Its purpose is to clean edges, corners and
profiles. After cleaning, this must be disengaged (raised) to profiles. After cleaning, this must be disengaged (raised) to profiles. After cleaning, this must be disengaged (raised) to
prevent raising dust and because the cleaning effect of the side prevent raising dust and because the cleaning effect of the side prevent raising dust and because the cleaning effect of the side
brush is inferior to that of the central brush. A left side brush is brush is inferior to that of the central brush. A left side brush is brush is inferior to that of the central brush. A left side brush is
also available as an optional feature. also available as an optional feature. also available as an optional feature.
5.3 5.3 5.3 Central brush: Central brush: Central brush:
The central brush Part. 2 Fig. 4 is the main machine The central brush Part. 2 Fig. 4 is the main machine The central brush Part. 2 Fig. 4 is the main machine
component for loading the dust and waste into the collection component for loading the dust and waste into the collection component for loading the dust and waste into the collection
bin. It is available in various degrees of hardness and bristle bin. It is available in various degrees of hardness and bristle bin. It is available in various degrees of hardness and bristle
types, depending on the type of material to be collected up and types, depending on the type of material to be collected up and types, depending on the type of material to be collected up and
on the type of floor. It is height adjustable in case of wear (See on the type of floor. It is height adjustable in case of wear (See on the type of floor. It is height adjustable in case of wear (See
Chapter 11). Chapter 11). Chapter 11).

IMPORTANT:

IMPORTANT: IMPORTANT: Never collect string, wires, packaging straps, sticks etc., that are longer than 25 cm as they Never collect string, wires, packaging straps, sticks etc., that are longer than 25 cm as they Never collect string, wires, packaging straps, sticks etc., that are longer than 25 cm as they
could wind around the centre and side brushes damaging them. could wind around the centre and side brushes damaging them. could wind around the centre and side brushes damaging them.
DESCRIPTION DESCRIPTION DESCRIPTION
Driving seat safety switch Driving seat safety switch Driving seat safety switch
Right and left side panel Right and left side panel Right and left side panel
Motor bonnet Motor bonnet Motor bonnet
Central brush protection plate: Right and Left Central brush protection plate: Right and Left Central brush protection plate: Right and Left
Reverse indicator light Reverse indicator light Reverse indicator light
Front angular wheel Front angular wheel Front angular wheel
TSM - Technological Systems by Moro Srl TSM - Technological Systems by Moro Srl TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167 - Fax +39.0434.954069 Tel. +39.0434.564167 - Fax +39.0434.954069 Tel. +39.0434.564167 - Fax +39.0434.954069
www.tsmitaly.com – sales@tsmitaly.com www.tsmitaly.com – sales@tsmitaly.com www.tsmitaly.com – sales@tsmitaly.com
OPERATING MANUAL OPERATING MANUAL OPERATING MANUAL
26 26 26
DURASWEEP 115 DURASWEEP 115 DURASWEEP 115
CODE CODE CODE
CON.0011 CON.0011 CON.0011
VRN.2044.ASX.G. VRN.2044.ASX.G. VRN.2044.ASX.G.
COV.7301R COV.7301R COV.7301R
VRN.1152.G VRN.1152.G VRN.1152.G
ACC.0002 ACC.0002 ACC.0002
RTA.0014, RAT.0015 RTA.0014, RAT.0015 RTA.0014, RAT.0015
V01 V01 V01