Siemens SINAMICS G130 Mode D'emploi page 1095

Signal targets for STW1_BM
Signal Meaning
0 = OFF (OFF1)
STW1.0
= ON
0 = OFF2 (immediate pulse suppression and switch on inhibit)
STW1.1
1 = No OFF2 (enable is possible)
0 = OFF3 (braking along the OFF3 ramp (p1135), then pulse suppression and switch on inhibit)
STW1.2
1 = No OFF3 (enable is possible)
0 = Inhibit operation
STW1.3
1 = Enable operation
0 = Inhibit ramp-function generator
STW1.4
1 = Operating condition
0 = Stop the ramp-function generator
STW1.5
1 = Enable the ramp-function generator
0 = Inhibit setpoint = 0
STW1.6
1 = Enable setpoint
STW1.7 = Acknowledge faults
STW1.8 Reserved
STW1.9 Reserved
STW1.10 1 = Control via PLC
STW1.11 Reserved
STW1.12 Reserved
STW1.13 Reserved
STW1.14 Reserved
STW1.15 Reserved
<1> Used in telegram 220.
<2> STW1.10 must be set to ensure that the drive object accepts the process data (PZD).
<3> Interconnection is not disabled.
1 2
DO: SERVO, VECTOR
PROFIdrive - STW1_BM control word, metal industry interconnection
p0854[0] = r2090.10
<2>
<3>
<3>
<3>
<3>
3 4
Interconnection [Function diagram] [Function diagram]
parameters internal control word signal target
p0840[0] = r2090.0 [2501.3]
p0844[0] = r2090.1 [2501.3]
p0848[0] = r2090.2 [2501.3]
p2816[0] = r2090.3 [2501.3]
p1140[0] = r2090.4 [2501.3] [3060] [3070] [3080]
p1141[0] = r2090.5 [2501.3]
p1142[0] = r2090.6 [2501.3] [3060] [3070] [3080]
p2103[0] = r2090.7 [2546.1]
- -
- -
[2501.3]
- -
<3> -
<3> -
-
<3>
-
<3>
5 6
fp_2425_54_eng.vsd
27.06.13 V04.07.00
<1>
PROFIdrive sampling time
Inverted
[2610] -
[2610] -
[2610] -
[2634.3] -
-
[3060] [3070] -
-
[8060] -
- -
- -
[2501] -
- -
- -
- -
- -
- -
7 8
Function diagram
- 2425 -
S120/S150/G130/G150