Avaya Octel 200 Manuel D'installation Et Maintenance page 686

12-46 Volume Installation et maintenance
6. A l'apparition du message de
l'invite, insérez la disquette
nº 2.
Octel 200/300 S 4.1
CPU
486
Testing Processor...PASSED
Testing System Voltage/Temp...PASSED
Testing ROM Checksum...PASSED
Testing PIT...PASSED
Testing DMA...PASSED
Testing UART...PASSED
Testing Modem...PASSED
Testing TDM Crosspoint...PASSED
Testing Floppy...PASSED
Testing RTC...PASSED
Testing BIC...PASSED
Testing OCC...PASSED
Testing WDT...PASSED
Testing Control Bus Interface...PASSED
Testing COMPLETED
Booting from floppy disk file XBOOT.IM
Image loaded
Loading Image from Floppy Disk
Loading file VMS1_3.CMP
Loading file VMS2_3.CMP
Please insert code floppy #2 & Press Return..
Loading file VMS3_3.CMP
Image loaded
------ SYSTEM SOFTWARE RELEASE S.X.X.X (XX/XX/XX) ------
Copyright(c) YYYY Lucent Technologies
TUE 11/08 08:44:58
(Modem enabled)(Telnet disabled) Last Logon : 00/00 00:00
@WAITING FOR VCU READY
LOADING VCU WITH FILE F:VCU.CMP
VCU STARTED
SYSTEM INITIALIZATION SUSPENDED!
Le démarrage d'Octel 200/300 à partir de la disquette est
maintenant terminé.
Model 300-6039-001
Step 27
All Rights Reserved.
19XX ID: S/N:000000
Rev F1
32MB
PBX:00
PB60019-21 Rev B