Does this telephone system give DOUBLE-INTERRUPTED RINGBACK
(Y/N, Empty line =N)
:Y
Some PBX systems may require a digit sequence to be dialed so that system
extensions get assigned to the incoming call group.
What digits, if any, should be dialed on all PORTS upon POWER-UP?
(May include: 0-9,*,#, D=DELAY, E=EXPECT DIAL TONE, or F=FLASH,
1-8 chars, Empty line = E)
:
End of telephone system specific questions.
Le programme INSTALL passe maintenant à la question 1.b) sur le nom de la société. Reportez-vous
à la section Réponses aux questions dans INSTALL.
PB60019-21 Rev B
Programme INSTALL
1-27
Octel 200/300
S 4.1