11C-2
Volume Installation et maintenance
11C.2 LISTAGE DE LA MIB PROPRIETAIRE OCTEL
VMX-DIAL DEFINITIONS ::= BEGIN
--
-- VMX-DIAL private MIB definitions for the VMX200/300
-- Filename: vmxdial.mib
-- This MIB definition is provided for use with OCtel's VMX200/300
-- product only.
--
-- Contact Person:
--
--
--
-- NOTE:
-- 1. This file will be published electronically in
--
--
-- 2. Sunnet Manager User:
--
works
--
replaced
--
--
--
--
--
--
--
--
IMPORTS
octel
octelOIDs
octelPlatforms OBJECT IDENTIFIER ::= { octelOIDs 1}
vmx200
vmx300
octelProducts
vmxDial
config
dNetstat
location
hwerr
-- dNetstat subtrees
message
lanCh
lanConn
systemName
Octel 200/300
S 4.1
LAN Engineering Group
Octel Communication Corporation
venera.isi.edu and can be obtained using ftp anonymous.
Sunnet doesn't support multi-dimensional table. To make this file
with subnet, the mnemonic for the second level table need to be
by the number it represents. Example:
locEntry is a table entry, and
route1 is defined as locroute.1 where locroute is locEntry.7
the above definition need to be changed as follows:
. remove the definition for locroute
. route1 is defined as locEntry.7.1
This need to be done for all multi-dimensional tables.
enterprises, NetworkAddress, IpAddress, Counter, Gauge,
TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB;
OBJECT IDENTIFIER ::= { enterprises 662 }
OBJECT IDENTIFIER ::= { octel 1 }
OBJECT IDENTIFIER ::= { octelPlatforms 3 }
OBJECT IDENTIFIER ::= { octelPlatforms 4 }
OBJECT IDENTIFIER ::= { octel 3 }
OBJECT IDENTIFIER ::= { octelProducts 1 }
OBJECT IDENTIFIER ::= { vmxDial 1 }
OBJECT IDENTIFIER ::= { vmxDial 2 }
OBJECT IDENTIFIER ::= { vmxDial 3 }
OBJECT IDENTIFIER ::= { vmxDial 4 }
OBJECT IDENTIFIER ::= { dNetstat 1 }
OBJECT IDENTIFIER ::= { dNetstat 2 }
OBJECT IDENTIFIER ::= { dNetstat 3 }
OBJECT-TYPE
SYNTAX
DisplayString (SIZE (0..255))
ACCESS
read-only
STATUS
mandatory
DESCRIPTION
"VMX System Name, from Configuration"
PB60019-21 Rev B