Avaya Octel 200 Manuel D'installation Et Maintenance page 419

8-2 Volume Installation et maintenance
CPU
486
Testing Processor...PASSED
Testing System Voltage/Temp...PASSED
Testing ROM Checksum...PASSED
Testing PIT...PASSED
Testing DMA...PASSED
Testing UART...PASSED
Testing Modem...PASSED
Testing TDM Crosspoint...PASSED
Testing Floppy...PASSED
Testing RTC...PASSED
Testing BIC...PASSED
Testing OCC...PASSED
Testing WDT...PASSED
Testing Control Bus Interface...PASSED
Testing COMPLETED
Booting from SCSI file XBOOT.IM
Image loaded
Loading Image from Hard Disk
Loading file VMS1_3.IM
Loading file VMS2_3.IM
Image loaded
Loading file VMS3_3.IM
------ SYSTEM SOFTWARE RELEASE S.X.X.X (xx/xx/xx) ------
Copyright(c) 2000
TUE MM/DD 08:44:58
(Modem activé)
@WAITING FOR VCU READY
LOADING VCU WITH FILE H:VCU.IM
VCU STARTED
RUNNING DISK REBUILD...REBUILD DONE
INITIALIZING PORTS...
PORT INITIALIZATION DONE
@
Octel 200/300 S 4.1
Model 300-6039-001
Step 27
Lucent Technologies
YYYY ID: S/N:000000
Dernière consultation : 00/00 00:00
Rev F1
32MB
All Rights Reserved.
PBX:00
PB60019-21 Rev B