1-32
Volume Installation et maintenance
Pas de préchargement des tables
Toutes les tables de configuration sont chargées lors du préchargement. Cependant, si une fonction
n'a pas été achetée, la table qui lui correspond n'est pas utilisée.
@INSTA
SYSTEM HAS ALREADY BEEN INSTALLED.
Do you wish to RE-INSTALL? (Y/N, empty line = N)
<<IF YES, ALL TABLES WILL BE CLEARED AND USER MESSAGES WILL BE LOST>>
:Y
PASSWORD:
CLEARING ALL TABLES...DONE.
INITIALIZING ALL USER DIRECTORIES...DONE.
Do you wish to PRE-LOAD any tables from a previous INSTALL
from your DISKETTE? (Y/N, empty line = N)
:Y
Insert desired DISKETTE in drive. Press RETURN when ready...
PRE-LOAD ALL configuration tables?
:Y
Table PRELOAD COMPLETE.
1.
SYSTEM PARAMETERS.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
2.
USER.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
3.
SLOTS.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
4.
NETWORK ROUTES.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
5.
NETWORK LOCATIONS.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
6.
NETWORK NUMBERING PLAN.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
7.
DISTRIBUTION LISTS.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
8.
COS.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
9.
INFORMATION Tables.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
10. SCHEDULE Table.
Table PRE-LOADED from disk. UPDATE if necessary when INSTALL is complete.
WARNING: FOR PROPER OPERATION SYSTEM MUST BE RESTARTED AFTER INSTALL:
INSTALL COMPLETE.
WAIT...DONE.
SAVE configuration to a DISKETTE? (Y/N, empty line = N).
:Y
Vous devez redémarrer Octel 200/300 pour qu'il fonctionne correctement. A l'invite @, entrez
RESTA 2. Apportez toutes les modifications UPDATE après le redémarrage du serveur de messages.
Octel 200/300
S 4.1
PB60019-21 Rev B