SDMO RES 9.5 EC Manuel D'installation page 96

To convert the generating set from LP to natural gas, apply the same procedure, feeding the supply union from the LP opening to
the natural gas opening. On the RES 13 EC and RES 12 TEC models, disconnect the wires from the DSAI module in LP mode. See
figure 2.21.
1
1. DSAI wires: connect the wires for natural gas, disconnect them for LP
Figure 2.21: DSAI (Digital Spark Advance Ignition) advanced module wires,
located in the air intake area on the generating set
20/73